#Hyperswitch mac alternative mac os x#

First of all insert the boot USB drive which we created above.

Now in Power management Setup, make HPET mode to 64-Bit. Then in Integrated peripherals, switch the SATA and On-board SATA/IDE Ctrl Mode to AHCI mode. Now you need to alter setting of three categories as shown in picture below.ДЇirst head over to Advanced Bios Feature, in that choose first boot option to CDROM. Now you need to configure Bios of your system. Then you will use the USB drive to run on a PC. TheВ Mac program will modify the official OS X installer and then install it on a USB drive. To create the image, use any software available on internet such as the free Unibeast. ProcedureДЄs you have the required stuff we will now begin with the guide.ДЇirst of all you need to create Boot disk or USB Drive which will allow you to install OS X into a DVD or a USB drive directly.

You need to buy OS X retail DVD and a blank rewriteable CD.

If you are going to buy a whole new hardware or you want to check whether your hardware is compatible or not then check out this link. If you want to install OS X on your PC then you need to have compatible hardware too because this makes the difference in this guide. RequirementsД«efore we start installing OS X in your PC you need following stuff without which it is impossible to do so.

#Hyperswitch mac alternative mac os x#

Installing Mac OS X on other hardware is against companyвЂ™s policy unless you bought a retail DVD for the same. Note: All the processes can even damage your hardware so be careful and do it on your own risk.